Public IP address
Public IP address
A public IP address is a static public IP address that is assigned to a node to configure access to the node on a private network from the Internet. External traffic goes through a public IP address and is handled by the cloud router, which acts as a 1:1 NAT. The address is a floating IP because it can automatically switch when the role changes from replica to master and back again. It will not change or be removed from the panel.
The private subnet on which to assign a public IP address must meet requirements-before adding a public IP address, prepare the subnet.
A
public IP address can be added:
when creating a cluster on an existing private subnet;
or on an existing cluster that is on a private subnet.
The number of public IP addresses in the cluster can be less than the number of nodes in the group, but cannot exceed it. You will be able to disable public IP address if necessary.
Requirements for private subnet
- The subnet should have a cloud router with a connection to an external network;
- The IP address of the cloud router should be the default gateway on the subnet.
If the subnet does not meet the requirements, prepare it to connect a public IP address.
Prepare a private subnet to connect the public IP address
1. Create a cloud router with connection to an external network
A cloud router allows you to route traffic between private networks.
You can use the router to configure access to the Internet from a private network or to access a device on a private subnet from the Internet using a public IP address.
- In Control Panel, go to Cloud Platform → Network.
- Open the Routers tab → click Create Router.
- Select pool of the router.
- Enter a name.
- Check the box Connect router to external network — an external IP address will be assigned to the router.
- Press Create.
2. Connect a private network to a cloud router
- Open the router card → click Add Subnet.
- Select a private subnet.
- Specify the IP address of the router. The cloud router IP address value that is specified by default is the default gateway on the subnet. If you are connecting a global router network, specify a router IP address other than the global router IP address, the IP addresses of the cloud servers on the network, and the
.253
and.254
service addresses. - Click Add Subnet.
Connect a public IP address
- Ensure that the cluster is on a private subnet that meets requirements.
- In Control Panel, go to Cloud Platform → Databases.
- Open the Database Cluster page → Settings tab.
- In the Addresses and Node Statuses block, open the Public IP Addresses tab.
- In the line with the desired node, click .
- Select New Public IP Address.
- Click .
Disable public IP address
- In Control Panel, go to Cloud Platform → Databases.
- Open the Database Cluster page → Settings tab.
- In the Addresses and Node Statuses block, open the Public IP Addresses tab.
- In the line with the desired node, click .
- Select No public IP address.
- Click .